Pedrollo Centrifugal Twin-Impeller Pump MODEL: 2CP32/200C POWER:3KW /4HP X 415V FLOW:40-250 L/MIN HEAD:66.5-36 METER INLET/OUTLET:1 1/2'' X 1 1/4'' Application Limit: • Temperature of the liquid from -10 °C to +90 °C • Ambient Temperature da -10 °C to +40 °C • Manometric suction lift up to 7 m • Max. working pressure 10 bar (6 bar for 2CP25/130) • Continuous service S1 Installation And Use: Suitable for use with clean water and with liquids that are not chemically aggressive towards the materials from which the pump is made. The high performance and adaptability to a wide range of applications make them the ideal choice in domestic, civil and industrial applications, in particular for the distribution of water in combination with pressure tanks for boosting pressure in the network and for firefighting sets. Installation needs to be undertaken in well ventilated closed areas or anyway protected from bad weather. These pumps distinguish themselves for their reliability, which can be best appreciated under automatic operating conditions in fixed installations. read more

LEO MULTISTAGE CENTRIFUGAL PUMP  MODEL: 2AC300H  Power: 3kW / 4HP X 415V Flow: 40-255 L/min Head: 67m-33m Max suction: 8m Outlet: 1½’’ & 1¼’’ Applications: Transfer of clean water or other liquids similar to water in physical and chemical properties. Agricultural irrigation. Industries use. Pressure boosting. Fire fighting. read more

Shimge BLT16-4 Stainless Steel Vertical Multistage Centrifugal Model: SHIMGE BLT16-4 Non-self priming vertical multistage centrifugal pump. Fan-cooled, 2-pole standard motor. Motor protection a) Single phase: Built-in thermal overload switch. b) Three phase: Must be connected to a motor starter in accordance with local regulations. Applications Limit of Pumps Medium temperature: normal type: 0℃~68℃ hot water type: 0℃~120℃ Ambient temperature: +40℃ Max ambient pressure: 1.0MPa Advisable to use motor of higher power in case that the density or viscosity of medium is above that of water. pH: 5 to 8 Electric Motor Full-enclosed and ventilating two-pole standard motor Protection class: IP55 Insulation class: F Standard voltage Single phase 220V-50Hz Three phase: 380/400V-50Hz Standard motor efficiency: 11kW to 45kW:IE3, other: IE2, specific efficiency value for below table Specifications Size Discharge 2″x2″ Power 4.0 kW / Three phase Flow Rate 133~330 L/min Head 38~54 meters Manometric Suction Lift Max. 7 meters Liquid Temperature Max. +90°C Environment Temperature Max. +40°C Dimensions (L x W x H) 945mm x 325mm x 415mm Weight 78kg read more

ARO 66605J-344 PTFE Double Diaphragm Pump 13 GPM, 100 PSI Product Details: AODD multi-port pump used for transferring or circulating a wide variety of feeds, including sludges, slurries, abrasive materials and shear-sensitive fluids Design facilitates enhanced suction lift even with heavier fluids and an explosion-proof and intrinsically safe operation when grounded properly Includes no complex controls, fittings or motors to install and operate Product Specifications: Item Double Diaphragm Pump Air Inlet Size 1/4'' FNPT Ball Material PTFE Body Material Polypropylene Check Seat Material Polypropylene Connection Style NPT Diaphragm Material PTFE Height 7.5'' Inlet/Outlet Size 1/2'' Length 11.75'' Manifold Connection Multiport Max. Dia. Solids 3/32'' Max. Flow 13 GPM Max. Flow GPM 13 Max. Operating Pressure 100 psi Max. Temp. 150 Degrees F Operation Type Air Operated Self-Priming Dry 10 ft. Self-Priming Wet 15 ft. Valve Type Ball Width 13.875'' read more

Pentax Ultra S Epic VSD Pump 0.9KW (1X1) ,415V/3PH MODEL :U05S-120/4T-S.D.8LEPIC   read more

Branco Cast Iron IE2 Efficiency Motor BRANCO IE2 Low-Voltage Cast Iron Motors (BR-IE2B3-4P015.0KW) Three phase 3ph 15kw 4Pole 50Hz B3 Foot Mounting With Branco straightforward, robust design, these high quality motors offer extensive potential for modification. They are available with standard variants, ensuring they can be used in wide range of industrial applications. Most General performance motors are stocked both centrally and locally for global off-the-shelf availability and fast delivery worldwide. Specification:   Kilowatt: 15 Rated sped (rpm): 4 pole Full Load Torque Nm: 98.1 Weight kg: 156 read more

ARO DIAPHRAGM PUMP 1-1/2'' NON-METALLIC 6661T3-344-C ARO Diaphragm Pump, 1-1/2'' Pro Series with Aluminum center body, Polypro fluid cap/manifold, Polypro seat, PTFE (Teflon) ball, PTFE (Teflon)/ Santoprene diaphragm PRODUCT TYPE Pump MATERIAL - DIAPHRAGM PTFE/Santoprene BRAND ARO PUMP APPLICATION Air Operated INLET/OUTLET CONNECTION TYPE ANSI Flange INLET SIZE 1-1/2 in MATERIAL - HOUSING Aluminum OUTLET SIZE 1-1/2 in SOLIDS HANDLING 1/4 in MATERIAL - BALLS Teflon/PTFE MATERIAL - SEATS Polypropylene MAX AIR INLET PRESSURE 120 psi (8.3 bar) MAX FLOW 100 gpm (378.5 lpm) MAX FLUID PRESSURE 120 psi (8.3 bar) MAX TEMPERATURE 200°F (93.3°C) NOISE LEVEL 77.7 dB(A) read more

Pedrollo Submersible Drainage Pump for clear water. Single phase, With Auto-Float Switch. Model: TOP4 (Made in Italy) Specifications Size Discharge 1-1/2″ Power 750 W / Single phase Flow Rate 20 ~ 320 L/min Head 12 ~ 2 meters Immersion Limit Max. 3 meters Liquid Temperature Max. +40°C Environment Temperature Max. +40°C Dimensions Ø x H 204mm x 334mm Weight 10.1 kg read more

Potenza Medium head & delivery Centrifugal Pump MODEL:PCHT-300 Potenza PCH series Centrifugal pumps with single impeller are able to offer high flow rates, provide smooth, nonpulsating delivery, and regulate the flow rate over a wide range without damaging in the pump. To be used in flow irrigation system in gardening, agriculture and industrial fittings. Specifications Liquid temperature up to 60℃ Ambient temperature up to 40℃ Total suction lift up to 9m Continuous Heavy Duty S1. Cast Iron Body. Brass Impeller. Mechanical Seal : Carbon/Ceramic/C & U Ball Bearings Single Phase : Heavy Duty Continuous Work Motor Housing : Aluminium Shaft : Carbon Steel / Stainless Steel Insulation : Class B Protection : IP44 Cooling : External Ventilation Power Phase Three Phase Pump Power kW 2.2 Pump Q. Max litre per min 500 Pump H Max m 32.5 Pump Type Centrifugal Pump Material Cast Iron read more

Pentax Ultra 9 SL Multistage Vertical Pump MODEL:U18SL-550/6T Products specifications Power Phase Three Phase Pump Power kW 4 Pump Q. Max litre per min 400 Pump H Max m 66.4 Vertical Multistage centrifugal pumps in ANSI 304 stainless steel. Ideal for non-loaded fluid pumping; pressurisation systems; irrigation; drinking or glycol water; water treatment; food industry; heating and air conditioning; washing systems. These pumps are available with overlapping or in-line deliveries and in threaded or flanged versions. Features Pump body: Cast Iron (SL) Impeller: stainless steel AISI 304 Liquid temperature: -15 ÷ +110 °C Motor 2 pole induction motor: 3~ 230/400V-50Hz P≤4kW 3~ 400/690V-50Hz P>4kW with thermal protection up to 1,85 kW Insulation class: F Degree of protection: IP44; IP55 ≥ 4,5 HP read more