Pentax Ultra 9S Stainless steel Multistage Pump MODEL:U09S-250/5T Products specifications Power Phase Three Phase Pump Power kW 1.9 Pump Q. Max litre per min 240 Pump H Max m 54.8   Monobloc horizontal multistage centrifugal pumps with ''Gas'' threaded deliveries. Ideal for non-loaded fluid pumping; pressurisation systems; irrigation; drinking or glycol water; water treatment; food industry; heating and air conditioning; washing systems. Features Pump body: stainless steel AISI 304 Motor bracket: aluminium Impeller: stainless steel AISI 304 Mechanical seal: ceramic-graphite ≤ 6 impeller; graphite-silicon carbide ≥ 7 impeller Motor shaft: stainless steel AISI 303 Liquid temperature: -15 ÷ +110 °C Operating pressuremax 8,5 bar Motor 2 pole induction motor: 3~ 230/400V-50Hz with thermal protection up to 1,85 kW Insulation class: F Degree of protection: IP44 read more

Model: F32-160B (Made in Italy) Pedrollo centrifugal pump with energy saving motor “IE3”. Three phase, 415V. Descriptions Used for: water supply, cleaning sets, pressure boosting, firefighting sets, irrigation, industrial applications, water circulation in climatisation sets, agricultural applications. The pumps must be installed in enclosed places, or at least protected against inclement weather. Features Liquid type: clean water Uses: industrial Applications: water supply systems, fire-fighting sets, air conditioning systems, washing systems, pressure systems, cooling systems, irrigation pumps typology: surface Family: standardized centrifugal pumps Performance Range Flow rate up to 6000 l/min (360,0 m³/h) Head up to 95 m Applications Limit Temperature of the liquid from -10 °C to +90 °C Ambient Temperature da -10 °C to +40 °C Manometric suction lift up to 7 m Max. pressure in pump body 10 bar (PN10) Continuous service S1 Specifications Size Discharge 2″ x 1-1/4″ Power 2200 W / Three phase Flow Rate 100 ~ 400 L/min Head 30 ~ 17 meters Manometric Suction Lift Max. 7 meters Liquid Temperature Max. +90°C Environment Temperature Max. +40°C Dimensions (L x W x H) 412mm x 242mm x 292mm Weight 33.4 kg read more

SHIMGE Horizontal Multi-Stage Centrifugal Pump (Fully S/Steel SUS 304)  MODEL:BWJ4-5PC Power: 1.5 Hp Max. Flow: 116l/Min Max. Height: 47 Mtr Voltage: 240v Inlet/Outlet: 1.25'' X 1''  Features: Higher Head, Stronger Performance. Overflowing Part Of Pump Made Of Stainless Steel 304. Hard Alloy And Fluorine Rubber Mechanical Seal. High Efficiency And Energy Saving, Safe And Reliable. Heavy-Duty Induction Motor. read more

Pedrollo Centrifugal Pump  Model: F80/160C (Made in Italy) Used for: water supply, cleaning sets, pressure boosting, firefighting sets, irrigation, industrial applications, water circulation in climatisation sets, agricultural applications. The pumps must be installed in enclosed places, or at least protected against inclement weather. Features Liquid type: clean water Uses: industrial Applications: water supply systems, fire-fighting sets, air conditioning systems, washing systems, pressure systems, cooling systems, irrigation pumps typology: surface Family: standardized centrifugal pumps Performance Range Flow rate up to 6000 l/min (360,0 m³/h) Head up to 95 m Applications Limit Temperature of the liquid from -10 °C to +90 °C Ambient Temperature da -10 °C to +40 °C Manometric suction lift up to 7 m Max. pressure in pump body 10 bar (PN10) Continuous service S1 Specifications Size Discharge 4″ x 3″ Power 15000 W / Three phase Flow Rate 500 ~ 4000 L/min Head 30 ~ 15 meters Manometric Suction Lift Max. 7 meters Liquid Temperature Max. +90°C Environment Temperature Max. +40°C Dimensions (L x W x H) 747mm x 330mm x 405mm Weight 116 kg read more

PENTAX WATER PUMP CM 80-160C Pentax CM 80-160C Industrial Water Pump belongs to the pump seriesCentrifugal Flangepump from Italy. The machine has a capacity of 15KW/20HP, 3-phase power, the maximum pressure is up to 29.7m and the maximum flow is 195m³/h. The machine works strong, the water output is very strong. Pentax CMis a machine with a threaded flange input and output connection. Thanks to this design, it is very simple and easy to disassemble when installing, maintaining and maintaining the machine. All models of the CM 80 series have an input of 100mm and an output of 80mm. Pentax CM 80-160C is used as a water supply pump, or fire protection for high-rise buildings, apartments, motels, hotels. PENTAX CM 80-160C - ADVANTAGES - Simple, solid design. - The machine operates strongly, the water is strong and very durable. - Pentax CM 80-160C has a removable flange connection, so it is very easy to disassemble. - 3 phase motor with 100% copper wire. -Pentax Water Pumpwarranted for a period of 12 months. PENTAX CM 80-160C - STRUCTURE - The pump head, motor housing and mounting system are made of very solid Gray Cast iron. - Impellers are made of cast iron, copper or stainless steel. - 100% copper winding motor. - The motor shaft is made of AISI 316 stainless steel. - The pump seal is a carbon ceramic seal. PENTAX CM 80-160C - SMALL CHARACTERISTICS Pentax CM Curve 80-160C Pentax CM 80-160C has a head range of 29.7m - 17.2m, corresponding to a flow range of 0 - 195m³/h. However, for the machine to operate at the highest efficiency, you should choose the middle of the characteristic curve. PENTAX CM 80-160C - APPLICATION Based on the above-mentioned working and generating characteristics, the Pentax CM 80-160C Water Pump is suitable for the following uses: Water supply pump for high-rise buildings, apartments, motels, hotels,... Water supply pumps for industries, agriculture, forestry and fishery. Input pump for pressure boosting and irrigation systems. Fire protection pump for buildings, warehouses, industrial parks, export processing zones,... PENTAX CM 80-160C - SIZE  Size Pentax CM 80-160C The unit of measurement is mm .   MODEL:CM 80-160C ORIGIN: Italy WATER TEMPERATURE: Up to 90°C SPECIES: Industrial Pump PRESSURE PILLAR: 29.7 - 17.2 m FLOW: 0 - 195 m³/h WATTAGE: 15KW / 20HP WEIGHT: 129 Kg IN/OUT TUBE: 100 / 80 mm ELECTRICITY SUPPLY: 3 Phase / 50Hz WATERPROOF LEVEL: IP 55 read more

Meudy High Capacity Submersible Drainage Pump MODEL:SH630 (3 PHASE) Features The body of motor & pump is made of rigid cast iron for long-lasting durability. Greatly increased maximum submersion depth due to double mechanical seal resistant to high pressure. Hydraulic part under the motor and motor cooled by the pumped water for safe operation also with the pump only partially immersed. Space economy by a top outlet. Hermetically sealed motor equipped. Motor is dry type submersible induction motor (2poles). Insulation class : F, IP68 Cable Length 20 meters Water temperature up to 40° C Max. water depth 30 meters Applications Deep well pre-dewatering High head dewatering Civil engineering Construction works Mines Quarries Coal ore Skurries Specifications Outlet 150mm Power 40HP Maximum Head 58m Rated Capacity 2330L/min Maximum Capacity 3670L/min Impeller Passage 15mm Dimensions (Diameter x H) 420mm x 1434mm Weight 390kg read more

REX NP50AV Threading Machine 1/2″-2″ REX NP50AV is a pipe threading machine with threading capacity from 1/2″ to 2″. Features Small but powerful 700 W series motor. Easy to use, high productivity, excellent portability 48kg. Pipe size can be adjusted simply by turning the lever nut. Thread length can be adjusted by just changing the lever contact (except manual Die Head). Specifications Threading Capacity 1/2″ – 2″ Motor Voltage 220V 50Hz Motor Power Input: 1600 W Output: 1000 W Rotation Speed (Unloaded) 39 rpm Dimensions (L x W x H) 700mm x 440mm x 408mm Weight 48 kg read more

MCC 2'' Threading Machine  Model : MCC 500 (JAPAN) Description Specifications :  Threading Capacity : 1/4'' - 2'' (Pipe BSPT or NPT) Motor Power :  750W  (Single Phase) Rotational Speed : 36 RPM (No load Speed)  Weight : 41 kg Dimensions (L x W x H) : 598 X 401 X 390 (mm)    Warranty :  Valid within 6 months from date of purchase. The warranty is limited to manufacturer fault  If the motor is burnt, the warranty will be void.  read more

GENIUS ROUND TYPE COOLING TOWER MODEL:GPT25 MOTOR:0.55KW WATER FLOW:5.42 L/S DIAMENSION :1400mm (D) X 1800mm (H) read more