Toku TKBB32-RV70 Heavy duty bar bender operated with Vikyno diesel engine. Features The body and structure is designed and made in Malaysia. Easy to provide after sales service. Strong power and compact structure, meanwhile is easy to operate. It is widely applied in architectural engineering, prefab and others bar material working plant. Specifications Maximum Bar Diameter 32mm Engine Vikyno RV-70 Engine Type Horizontal, water-cooled 4 cycle Diesel Engine Output (hp/rpm) 7 / 2400 Roller Size (mm) Ø64, Ø86, Ø96, Ø110, Ø125 Weight (kg) 650 Dimension (mm) L x W x H 1170 x 900 x 750 read more

Pedrollo double impeller centrifugal electric pump Model: 2CP25/16A (Made in Italy)  The high efficiency and adaptability of these pumps to even the most unusual of applications, makes them ideal for use in the domestic, civil and industrial sectors; in particular for the distribution of water in combination with pressure sets, for pressure boosting and in fire-fighting sets. Suitable for use with clean water and liquids that are not chemically aggressive towards the materials from which the pump is made. The pump should be installed in an enclosed environment, or at least sheltered from inclement weather. Features Liquid type: clean water Uses: domestic, civil, industrial Applications: water supply systems, fire-fighting sets, pressure systems typology: surface Family: centrifugal Performance Range Flow rate up to 450 l/min (27,0 m³/h) Head up to 112 m Application Limit Temperature of the liquid from -10 °C to +90 °C Ambient Temperature da -10 °C to +40 °C Manometric suction lift up to 7 m Max. working pressure 10 bar (6 bar for 2CP25/130N) Continuous service S1 Specifications Size Discharge 1¼” x 1″ Power2.2  2.2KW(3HP)/ Three phase Flow Rate 20 ~ 160 L/min Head 67 ~ 32 meters Manometric Suction Lift Max. 7 meters Liquid Temperature Max. +90°C Environment Temperature Max. +40°C Dimensions (L x W x H) 404mm x 225mm x 261mm Weight 25 kg read more

Pedrollo centrifugal pump with low/medium flow rate but high head. Model: CPm160C (Made in Italy) Single Phase, 240V Descriptions Suitable for use with clean water and with liquids that are not chemically aggressive towards the materials from which the pump is made. These pumps are widely used in civil, agricultural and industrial applications such as for supplying water, in air conditioning and cooling systems, for irrigation, etc. The pump should be installed in an enclosed environment or sheltered from inclement weather. Performance Range Flow rate up to 900 l/min (54 m³/h) Head up to 76 m Applications Limits • Manometric suction lift up to 7 m Liquid temperature between -10 °C and +90 °C Ambient temperature between -10 °C and +40 °C Max. working pressure 10 bar Continuous service S1 Specifications Size Discharge 1-1/2″ x 1″ Power 1.1kW / 1 phase Flow Rate 50 ~ 200 L/min Head 31 ~ 20 meters Manometric Suction Lift Max. 7 meters Liquid Temperature Max. +90°C Environment Temperature Max. +40°C Dimensions (L x W x H) 373 x 207mm x 260mm Weight 19.7 kg read more

POTENZA  Semi Open Impeller SUS Centrifugal Pump PSKT-300 (2.5x2) 2.2KW 415V/3PH   Potenza PSK Series, Semi Open Impeller Stainless Steel Centrifugal Pump suitable for circulation cleaning system of various production lines and transferring medium containing impurities. Specifications Maximum working pressure : 8 bar Maximum liquid temperature: -15℃ ~ +80℃ Pump body, impeller, diffuser and casing cover in SUS 304 Shaft in SUS 304 Bracket and motor casing in aluminium T.E.F.C. 2 pole motor Insulation: Class F Protection defree: IP55 1Ø240V ± 5% 50Hz, 3Ø415V ± 5% 50Hz   Power Phase Three Phase Pump Power kW 2.2 Pump Q. Max litre per min 950 Pump H Max m 15 Pump Type Centrifugal Pump Material Stainless Steel read more

DAB-K12-200M Centrifugal Single Impeller Pump  Technical Specifications Brand DAB Pumps Product Type Single Impeller Cast Iron Pump Suitable For Water Transfer Bar 1.84 Bar Flow Range Category c. 200 – 299 L/min Flow Rate (L/min) 280 L/min Hp 1 Hp kPa 186 kPa Kilo Watts 0.75 kW Casing Material Cast Iron Head Range Category a. 0 – 39 m Max Head (m) 18.4 m Port Size Inlet 1 1/2″ BSPF inlet Port Size Outlet 1 1/2″ BSPF outlet Powered Electric Volts 240 V Warranty (months) 12 Months Watts 750 W read more

Pedrollo F65/160A: 15kW, 2400L/min, 40mH, 3phase, 3″x2-1/2″ Pedrollo centrifugal pump with energy saving motor “IE3”.Three phase, 415V. Model: F65/160A (Made in Italy) Descriptions Used for: water supply, cleaning sets, pressure boosting, firefighting sets, irrigation, industrial applications, water circulation in climatisation sets, agricultural applications. The pumps must be installed in enclosed places, or at least protected against inclement weather. Features Liquid type: clean water Uses: industrial Applications: water supply systems, fire-fighting sets, air conditioning systems, washing systems, pressure systems, cooling systems, irrigation pumps typology: surface Family: standardized centrifugal pumps Performance Range Flow rate up to 6000 l/min (360,0 m³/h) Head up to 95 m Applications Limit Temperature of the liquid from -10 °C to +90 °C Ambient Temperature da -10 °C to +40 °C Manometric suction lift up to 7 m Max. pressure in pump body 10 bar (PN10) Continuous service S1 Specifications Size Discharge 3″ x 2-1/2″ Power 15000 W / Three phase Flow Rate 600 ~ 2400 L/min Head 40.5 ~ 28 meters Manometric Suction Lift Max. 7 meters Liquid Temperature Max. +90°C read more

Pentax Twin impeller Centrifugal water pump MBT-300/00 Product description Two impeller compact centrifugal pumps for constructing pressurisation systems for civil and industrial plant: guarantee good ratio between pressure and delivery.   Specification: MBT-300/00 Pump body: cast iron Impeller: Noryl or brass Liquid temperature: 0 - 50 °C 2 pole induction motor: 3~ 230/400V-50Hz 1~ 230V-50Hz with thermal protection Insulation class: F Protection degree: IP44 Products specifications Power Phase Three Phase Pump Power kW 2.2 Pump Q. Max litre per min 10 Pump H Max m 48 read more

Pentax Twin impeller Centrifugal water pump MODEL:CBT-1000 Description Two impeller centrifugal pumps for constructing pressurisation systems for civil and industrial plant; the two counter-posed impellers guarantee high head with good delivery. Istructions Istructions Features Pump body: cast iron Impeller: brass or Noryl Temperature of the liquid: Noryl® impeller 0 - 50 °C brass impeller 0 - 90 °C Motor Type: 3~ 230/400V-50Hz; 1~ 230V-50Hz with thermal protection Insulation class: F Degree of protection: IP44 Power Phase Three Phase Pump Power kW 7.5 Pump Q. Max litre per min 550 Pump H Max m 85 read more